Hey Everyone,
Banging my head against a wall right now - trying to get the configuration set up with the server on a different subnet. I followed the IBM documentation - and am trying to use multiple non-UEFI endpoints.
Option 60 = PXEClient
Option 43 =
06:01:07:08:07:00:0F:01:0A:0A:0A:3A:09:05:00:0F:02:52:42:0A:02:00:52:FF
No matter what happens, I am always getting “PXE-E78 Could not locate boot server”.
Not seeing what could be the issue! Anyone have any thoughts other than networking issues? The server is routable.
Thanks,
Will
Hi,
the option 43 seems to be well formed pointing to pxe server 10.10.10.58. Could you please check that between server and target the ports reported at the following link are open (routed between different subnets and not blocked by a firewall) -> http://www-01.ibm.com/support/knowledgecenter/SS63NW_9.2.0/com.ibm.tem.life.doc_9.2/Lifecycle_Man/OSD_Users_Guide/r_%20bm_server_ports.html
Thanks.
Thank you! Turned out to be firewall issue with ports. I was providing guidance remotely to a client, they checked the firewall again after the fact.
Thanks,